Please wait while the page loads...

2018 Audi Q5 Check Engine Light

A flashing light indicates that the problem is curious and if not taken care of suddenly may result in primary damage to the vehicle. If the check engine light in your 2018 Audi Q5 starts flashing, that means that the problem needs urgent attention and your Audi should be brought in suddenly. This shining light usually indicates a harsh engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily raise the temperature of the catalytic converter to a point where damage is conceivable, requiring an fancy repair. Assorted owners ask if spark plugs cause the check engine light to flash? This can solely be the cause. A destructive, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a particularly expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Audi North Atlanta at this moment by calling 7706189076.

Check Engine Light Service 2018 Audi Q5

What do you do when you’re driving along in your Audi Q5 and suddenly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Audi owners, your heart sinks some because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Audi Q5 checked as soon as probable. Ignoring that warning could end up causing major wear and tear to expensive engine components.

When your 2018 Audi Q5's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t acceptable, a computer turns on your check engine light. This amber or yellow light is customarily labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic audit tool that is used by our Audi auto repair technicians at Audi North Atlanta. There are also a number of relatively low-priced code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to select the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more handy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfactory to get the handy code reading and diagnosis. The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The satisfactory news, Audi North Atlanta offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.

2018 Audi Q5 Check Engine Light Flashing

Although there are countless attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are diverse ordinary causes including something as ordinary as a loose gas cap. Further ordinary reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, faulty head gasket, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Audi Certified Mechanics and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Audi issue was fixed.

Every 2018 Audi Q5 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its rigorous systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is erroneous nor what to do about it. That’s where we come in; Audi North Atlanta provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service expert.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2018 Audi Q5 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a little positive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2018 Audi Q5. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of different things. It can be as commonplace as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your 2018 Audi Q5, contact Audi North Atlanta. Our Audi service department can assist you find out what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Audi North Atlanta today!

2018 Audi Q5 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Q5. There are hundreds of further codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling preeminent diagnostics will give you comfortable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discernible and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Transmission issues
  • Computer output circuit issues
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Ignition system faults
  • Emissions controls issues
  • Fuel and air metering systems problems
  • O2 Sensor

This is why it is essential for someone who does not have various of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a certified Audi mechanic. Call Audi North Atlanta at 7706189076 today or schedule your check engine light service online today! If the engine light comes on due to a dangerous concern, you risk damaging your car further by not repairing the issue correct away.

Will the check engine light reset itself?

The check engine light on your 2018 Audi Q5 will ordinarily shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going responsive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Audi Q5 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Audi North Atlanta so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2018 Audi Q5?

When your check engine light comes on, this could be as classic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a harsh problem that could cause harsh damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less harsh but a shining check engine light indicates that your vehicle’s engine is in harsh trouble and service is essential suddenly. If your check engine light is shining in your 2018 Audi Q5, we exceedingly recommend not to drive the vehicle and schedule Audi service today. Below is a list of the most classic reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Audi Q5 is what determines how much fuel is decisive to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to aware changes, like altitude. If your Audi Q5 is having trouble starting, idling rough or has a nimble change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most classic and plentiful cause is that your 2018 Audi Q5 gas cap is loose, damaged or missing. The gas cap for your 2018 Audi Q5 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on suddenly after you put gas in your 2018 Audi Q5, original thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is meager or dead. The battery in your 2018 Audi Q5 is every considerable. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The cost of a new one depends on the type of Audi you drive, but check our current service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Audi Q5’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Audi North Atlanta offers a complimentary multi-point inspection with every Audi service. If you have an issue with your catalytic converter and don't get it repaired, your 2018 Audi Q5 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause substitute problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or substitute item can wreak havoc on your 2018 Audi Q5 if it’s not installed subsequently. These aftermarket parts and accessories can eject the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound routine, bring your Q5 to Audi and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts original place might cost a bit bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are decisive for your 2018 Audi Q5. The spark plugs are the part of your engine that ignites the air/fuel range in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In a bit extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, major to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less helpful when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Audi Q5's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to learn the polite range of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2018 Audi Q5 has a vacuum leak. Every Audi Q5 has a vacuum system that performs a extensive variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, exceptionally if they’re exposed to intense heat or extreme freezing.

Is it safe to drive your 2018 Audi Q5 with the check engine light on?

This question is not very authentic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be strong to drive. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more combative problem. If the check engine light is twinkling, this means that there is a combative issue and it is recommended to service your Audi Q5 immediately. Call the experts at Audi North Atlanta by dialing 7706189076 so you can describe the issues. Or reduce your speed and bring your 2018 Audi to our certified mechanics as soon as attentive.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is necessary to predict how countless miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advise that you pull over and contact Audi North Atlanta to help indicate if your vehicle is safe to drive in or if we advise a tow truck.