Please wait while the page loads...

What could cause the check engine light to come on in a 2013 Audi Q7?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less relentless but a flashing check engine light indicates that your vehicle’s engine is in relentless trouble and service is needed immediately. If your check engine light is flashing in your 2013 Audi Q7, we extremely advise not to drive the vehicle and schedule Audi service immediately. Below is a list of the most regular reasons your check engine light can come on:

  • One of the most normal and copious cause is that your 2013 Audi Q7 gas cap is loose, damaged or missing. The gas cap for your 2013 Audi Q7 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2013 Audi Q7, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2013 Audi Q7 has a vacuum leak. Each Audi Q7 has a vacuum system that performs a expansive variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme cold.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less good when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Audi Q7's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the honorable mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are necessary for your 2013 Audi Q7. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or traditional, you will experience poor performance and reduced power. In a lot extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or different item can wreak havoc on your 2013 Audi Q7 if it’s not installed perfectly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even impede the automobile from starting. If these issues sound commonplace, transport your Q7 to Audi and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get poor perform and damage caused by poor installation perform corrected.
  • The battery is low or dead. The battery in your 2013 Audi Q7 is each dangerous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Audi you commute, but check our current service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Audi Q7’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Audi North Atlanta offers a complimentary multi-point inspection with each Audi service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Audi Q7 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause different problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Audi Q7 is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Audi Q7 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

What Does the Check Engine Light Mean?

One of the most customarily misunderstood lights or indicators in your 2013 Audi Q7 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few assorted ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Audi Q7. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a range of different things. It can be as authentic as your gas cap being loose or as draconian as engine knocking. If your check engine light is on in your 2013 Audi Q7, contact Audi North Atlanta. Contact Audi North Atlanta today! Our Audi service department can help you find out what code is turning your check engine light on or inspect why your check engine light is glaring.

Will the check engine light reset itself?

The check engine light on your 2013 Audi Q7 will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going efficient, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Audi Q7 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Audi North Atlanta so the light and code can be double-checked and reset.

2013 Audi Q7 Check Engine Light Flashing

Although there are copious ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various instinctive causes including something as amusing as a loose gas cap. Further instinctive reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Audi Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Audi issue was fixed.

Every 2013 Audi Q7 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what totally is wrong nor what to do about it. That’s where we come in; Audi North Atlanta provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

2013 Audi Q7 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard swiftly illuminates, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also common as the OBD (on-board computer diagnostic system) in your Q7. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a few patience, tackling prime diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, conspicuous and handy vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

  • Transmission issues
  • Fuel and air metering systems problems
  • O2 Sensor
  • Ignition system faults
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Emissions controls issues
  • Bad Spark Plugs

This is why it is primary for someone who does not have a few of automotive knowledge to not assume what a code means. If the engine light comes on due to a serious concern, you risk harmful your car additional by not repairing the issue noble away. Call Audi North Atlanta at 7706189076 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out abruptly by a certified Audi mechanic.

Is it safe to drive your 2013 Audi Q7 with the check engine light on?

If the check engine light is flashing, this means that there is a critical issue and it is recommended to service your Audi Q7 shortly. This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more vital problem. Call the advisors at Audi North Atlanta by dialing 7706189076 so you can describe the issues. Or reduce your speed and bring your 2013 Audi to our certified mechanics as soon as conceivable.

Check Engine Light Service 2013 Audi Q7

What do you do when you’re driving along in your Audi Q7 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Audi owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Audi Q7 checked as soon as attainable. Ignoring that warning could end up causing gigantic break to costly engine components.

When your 2013 Audi Q7's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is constantly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is asset with an electronic observe tool that is used by our Audi auto repair mechanics at Audi North Atlanta. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to asset the issue and repair it.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy subsequently. If you check engine light is flashing, we recommend that you pull over and contact Audi North Atlanta to help determine if your vehicle is safe to drive in or if we recommend a tow truck. Since any check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it nice to get the correct code reading and diagnosis. The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The nice news, Audi North Atlanta offers complimentary multi-point inspections and free diagnostics, in most cases, to help select the cause of your check engine light.

2013 Audi Q7 Check Engine Light

A twinkling light indicates that the problem is serious and if not taken care of suddenly may result in major wear and tear to the car. If the check engine light in your 2013 Audi Q7 starts twinkling, that means that the problem needs abrupt attention and your Audi should be brought in suddenly. This shining light usually indicates a exacting engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can swiftly boost the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exclusively be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair. If your check engine light is glaring, please contact our department of automotive veterans at Audi North Atlanta abruptly by calling 7706189076.