2013 Audi Q5 Check Engine Light

Check Engine Light Service 2013 Audi Q5

What do you do when you’re driving along in your Audi Q5 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Audi owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Audi Q5 checked as soon as probable. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2013 Audi Q5's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t acceptable, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Audi auto repair mechanics at Audi North Atlanta. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional professional to mean the issue and repair it.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy subsequently. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advise that you pull over and contact Audi North Atlanta to help opt for if your vehicle is safe to drive in or if we advise a tow truck. Since each check engine code has its own level of severity, it is hard to predict how frequent miles you can drive with the warning light on.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is constantly between $88 and $111. The superb news, Audi North Atlanta offers complimentary multi-point inspections and free diagnostics, in most cases, to help learn the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more treacherous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it superb to get the relevant code reading and diagnosis.

2013 Audi Q5 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard expeditiously illuminates, but in reality, it is not something that should cause you to shut down in fear prudent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also daily as the OBD (on-board computer diagnostic system) in your Q5. There are hundreds of chance codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling vital diagnostics will give you concerned knowledge about your automobile and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Sadly, clear and good automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

• Bad Spark Plugs
• Fuel and air metering systems problems
• Ignition system faults
• O2 Sensor
• Transmission issues
• Loose Gas Cap or Missing Gas Cap
• Computer output circuit issues
• Old Battery
• Emissions controls issues

This is why it is important for someone who does not have several of automotive knowledge to not assume what a code means. Call Audi North Atlanta at 7706189076 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out immediately by a certified Audi technician. If the engine light comes on due to a perilous concern, you risk bad your car further by not repairing the issue correct away.

2013 Audi Q5 Check Engine Light

If the check engine light in your 2013 Audi Q5 starts blinking, that means that the problem needs immediate attention and your Audi should be brought in quickly. A blinking light indicates that the problem is serious and if not taken care of quickly may result in major damage to the automobile. This twinkling light usually indicates a relentless engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can hastily expand the temperature of the catalytic converter to a point where damage is practical, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A contentious, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our company of automotive experts at Audi North Atlanta swiftly by calling 7706189076. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair.

Will the check engine light reset itself?

The check engine light on your 2013 Audi Q5 will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going possible, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Audi Q5 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Audi North Atlanta so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2013 Audi Q5?

When your check engine light comes on, this could be as common as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a exceptional problem that could cause exceptional damage to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow ordinarily means something less exceptional but a flashing check engine light illustrates that your vehicle’s engine is in exceptional trouble and service is mandatory hastily. If your check engine light is flashing in your 2013 Audi Q5, we extraordinarily recommend not to travel to work the vehicle and schedule Audi service at this moment. Below is a list of the most fair reasons your check engine light can come on:

• One of the most cooperative and copious cause is that your 2013 Audi Q5 gas cap is loose, damaged or missing. The gas cap for your 2013 Audi Q5 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on instantly after you put gas in your 2013 Audi Q5, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• New Spark Plugs or Plug Wires are basic for your 2013 Audi Q5. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or old, you will experience polite performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more lavish repairs.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Audi Q5 is what determines how much fuel is basic to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Audi Q5 is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less competent when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Audi Q5's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the prudent mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
• Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2013 Audi Q5’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Audi North Atlanta offers a complimentary multi-point inspection with every Audi service. If you have an issue with your catalytic converter and don't get it revamped, your 2013 Audi Q5 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause diverse problems from overheating.
• Your 2013 Audi Q5 has a vacuum leak. Every Audi Q5 has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to important heat or extreme cold.
• The battery is low or dead. The battery in your 2013 Audi Q5 is every cooperative. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't really require maintenance. The price of a new one depends on the type of Audi you drive, but check our acceptable service coupons and specials.
• Issues with all aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2013 Audi Q5 if it’s not installed appropriately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound prevalent, bring your Q5 to Audi and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing all issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a few bit more but could save you money from having to get polite work and damage caused by polite installation work corrected.

Is it safe to drive your 2013 Audi Q5 with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is constantly indicated by a correct glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more extraordinary problem. If the check engine light is flashing, this means that there is a extraordinary issue and it is recommended to service your Audi Q5 expeditiously. Call the experts at Audi North Atlanta by dialing 7706189076 so you can describe the issues. Or reduce your speed and bring your 2013 Audi to our certified mechanics as soon as available.

2013 Audi Q5 Check Engine Light Flashing

Although there are countless ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various prevailing causes including something as simple as a loose gas cap. Additional prevailing reasons for a Check Engine Light are damaged oxygen sensor, faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty emissions control part, or defective spark plugs to name some. No matter what is the root cause of the Check Engine Light, we have the Audi Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Audi issue was fixed.

Every 2013 Audi Q5 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its rigorous systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Audi North Atlanta provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service expert.

What Does the Check Engine Light Mean?

One of the most mostly misunderstood lights or indicators in your 2013 Audi Q5 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a tiny contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Audi Q5. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name assorted. With that being said, the check engine light can mean a assortment of understandable things. It can be as visible as your gas cap being loose or as relentless as engine knocking. If your check engine light is on in your 2013 Audi Q5, contact Audi North Atlanta. Contact Audi North Atlanta today! Our Audi service department can help you opt for what code is turning your check engine light on or inspect why your check engine light is flashing.