2013 Audi A6 Check Engine Light

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replaced. If you check engine light is twinkling, we recommend that you pull over and contact Audi North Atlanta to assist represent if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on.

Will the check engine light reset itself?

The check engine light on your 2013 Audi A6 will mostly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going correct, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Audi A6 light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Audi North Atlanta so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The admirable news, Audi North Atlanta offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it admirable to get the satisfying code reading and diagnosis.

Check Engine Light Service 2013 Audi A6

What do you do when you’re driving along in your Audi A6 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Audi owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Audi A6 checked as soon as capability. Ignoring that warning could end up causing primary damage to expensive engine elements.

When your 2013 Audi A6's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t apt, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electrical scan tool that is used by our Audi auto repair mechanics at Audi North Atlanta. There are also a number of relatively legal code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the issue and repair it.

What Does the Check Engine Light Mean?

One of the most regularly misunderstood lights or indicators in your 2013 Audi A6 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a little discrete ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your 2013 Audi A6. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can imply a variety of different things. It can be as straightforward as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2013 Audi A6, contact Audi North Atlanta. Contact Audi North Atlanta today! Our Audi service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is shining.

What could cause the check engine light to come on in a 2013 Audi A6?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a miraculous problem that could cause miraculous damage to your engine and come with a intense repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less miraculous but a glaring check engine light implies that your vehicle’s engine is in miraculous trouble and service is decisive expeditiously. If your check engine light is glaring in your 2013 Audi A6, we exceedingly advocate not to drive the vehicle and schedule Audi service today. Below is a list of the most decent reasons your check engine light can come on:

• The battery is scanty or dead. The battery in your 2013 Audi A6 is every meaningful. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't definitely require maintenance. The price of a new one depends on the type of Audi you drive, but check our elaborate service coupons and specials.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or distinctive item can wreak havoc on your 2013 Audi A6 if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound regular, bring your A6 to Audi and have our unit of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts original place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your 2013 Audi A6 has a vacuum leak. Every Audi A6 has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme freezing.
• Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2013 Audi A6’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Audi North Atlanta offers a complimentary multi-point inspection with every Audi service. If you have an issue with your catalytic converter and don't get it serviced, your 2013 Audi A6 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause distinctive problems from overheating.
• New Spark Plugs or Plug Wires are fundamental for your 2013 Audi A6. The spark plugs are the part of your engine that ignites the air/fuel range in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or departed, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
• One of the most regular and innumerable cause is that your 2013 Audi A6 gas cap is loose, damaged or missing. The gas cap for your 2013 Audi A6 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is departed or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2013 Audi A6, original thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less relevant when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Audi A6's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to endorse the noble range of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Audi A6 is what determines how much fuel is fundamental to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to diversified changes, like altitude. If your Audi A6 is having trouble starting, idling rough or has a swift change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.

2013 Audi A6 Check Engine Light

If the check engine light in your 2013 Audi A6 starts flashing, that means that the problem needs abrupt attention and your Audi should be brought in abruptly. A flashing light indicates that the problem is hazardous and if not taken care of abruptly may result in big damage to the vehicle. This blinking light commonly expresses a rigid engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where wear and tear is viable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, aged or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our team of automotive experts at Audi North Atlanta suddenly by calling 7706189076. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair.

2013 Audi A6 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also sane as the OBD (on-board computer diagnostic system) in your A6. There are hundreds of odd codes that your check engine light can imply. While that sounds daunting, with a microscopic patience, tackling main diagnostics will give you convenient knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, unmistakable and convenient vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of factual OBD codes, there are also hundreds of factual reasons for the light, including:

• Emissions controls issues
• Loose Gas Cap or Missing Gas Cap
• Ignition system faults
• O2 Sensor
• Old Battery
• Computer output circuit issues
• Fuel and air metering systems problems
• Transmission issues
• Bad Spark Plugs

This is why it is hard for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Audi North Atlanta at 7706189076 today or schedule your check engine light service online today! If the engine light comes on due to a serious concern, you risk damaging your car further by not repairing the issue noble away. When your check engine light comes on, you should get it checked out quickly by a certified Audi mechanic.

Is it safe to drive your 2013 Audi A6 with the check engine light on?

If the check engine light is blinking, this means that there is a alarming issue and it is recommended to service your Audi A6 quickly. This question is not notably uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is typically indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more alarming problem. Call the specialists at Audi North Atlanta by dialing 7706189076 so you can describe the issues. Or decrease your speed and bring your 2013 Audi to our certified mechanics as soon as possible.

2013 Audi A6 Check Engine Light Flashing

Although there are countless ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent common causes including something as simple as a loose gas cap. Alternative common reasons for a Check Engine Light are damaged oxygen sensor, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, or defective spark plugs to name a little. No matter what is the root cause of the Check Engine Light, we have the Audi Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Audi issue was serviced.

Every 2013 Audi A6 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are normally detecting conditions while sending data to the computerized control squad. If the computerized control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is inaccurate nor what to do about it. That’s where we come in; Audi North Atlanta provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.